CH340 USB to ESP8266 ESP-01 ESP-01S Wi-Fi Adapter Board

USB to ESP-01 adapter module has CH340G USB to TTL driver IC onboard, so you can easily use your computer to do ESP-01 functional debugging.Its a great programmer for the ESP-01. Its very easy to just plug it in and send AT commands, or flip the switch to program and upload a sketch from Arduino IDE. Also you don’t need a separate 3.3V power supply to power the ESP-01.Features:Working voltage: 4.5V – 5.5V (On-board 3.3v LDO Regulator)Working current: 300mA(LDO regulator can supply)Selectable working mode: On-board toggle switch. UART side for serial TTL debugging by AT commands, PROG for firmware programmingUSB to serial TTL chip: CH340GLogic level: 3.3VApplications: Home automation, Sensor networks, Industrial wireless control, etc.Other Comments:1. The ESP-01 boards are super-simplified ESP8266 and these allow for flashing during development.2. This little gadget makes programming the ESP 01s a breeze. It’s a must have for installing firmware.3. Not at all my first programmer for these boards, but the easiest by a landslide! No buttons to hold down or wiring to do.4. This worked, didn’t try the debug ger but the upload was flawless, very easy and it didn’t seem like it would break even when I stored it in tight confines. Please make sure to set your baud to at least 115200 yes the USB will work either way, but the extra speed will help you.Package Included:1 X CH340 USB to ESP8266 ESP-01 ESP-01S Wi-Fi Adapter Board